PRODUCT CENTER
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
H-beam is a kind of Economic section steel, which sectional area distribution is more optimized, the ratio of strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as the English letter "H" ,so be named as H-Beam. Because the various part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used.
H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.
Q235 galvanized coil is a surface galvanized coil with yield strength of 235MPa. PPGI is galvanized color plate, PPGL is galvanized color plate, both are color plates, the substrates are different, one is galvanized structure, the other is galvanized structure, the substrate is different, which determines the difference in performance. DC01 Galvanized steel coil is used for automobiles, sanitary ware, food machinery, pressure vessels, nuclear power, chemical equipment, elevators, rail transit, machinery manufacturing, structural piping, and architectural decoration.
GET A FREE QUOTE
CONTACT US
No. 887, Tai'an Road, Xingfu Street, Huaiyin District, Jinan City, Shandong Province
GET A FREE QUOTE