PRODUCT CENTER
<strong>5083 belongs</strong> to Al-Mg-Si alloy, which is widely used, especially in the construction industry.<br> <strong>It is the most promising alloy. </strong>Good corrosion resistance, good weldability, good cold processing, and has moderate strength.<br> <strong>5083 is magnesium, </strong>which has good forming performance, corrosion resistance, weldability and medium strength. <br> <strong>5083 aluminum </strong>is one of the most widely used antirust<br>
<strong>Al-cu-mg-zn alloy,</strong> which is made by adding Zn on the basis of duralumin.<br> <strong>This kind of alloy </strong>is currently the highest strength of aluminum alloy, higher than other aluminum alloy strength, so called super hard aluminum. <br> <strong>Disadvantage is also </strong>very poor corrosion resistance, can improve the artificial aging temperature or aluminum.
<strong>6063 aluminum alloy</strong> material. The main alloy elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy. <br> <strong>6063 aluminum alloy</strong> profile with its good plasticity, moderate heat treatment strength, good welding performance and anodic oxidation treatment, gorgeous surface color and many other advantages, is widely used in building profiles, irrigation pipes, for vehicles, platforms, furniture, elevators, fences and other tubes, bars, profiles.
<strong>7075 aluminum </strong>alloy is a cold - treated forging alloy, high strength, far better than mild steel. <br/> <strong>7075 </strong>is one of the strongest alloys commercially available. <br/> <strong>Under heat treatment</strong>, can achieve very high strength characteristics.<br/> <strong>The alloy </strong>also has good mechanical properties and anode reaction.<br/> <strong>Aluminum</strong> is a silver-white light metal, relatively soft, density 2.7g/cm3, melting point 660.4℃, boiling point 2467℃, aluminum and aluminum alloys have many excellent physical properties, has been very widely used.
<strong>1060 aluminum plate</strong> is widely used in products with low strength requirements. <br> Products are often used in signs, billboards, building exterior decoration, bus body, tall buildings and factory wall body adornment, kitchen sink, lamp holder, fan blade, electronic parts, chemical equipment, mechanical parts, deep drawing of sheet or spinning concave ware, welding part, heat exchanger, clock surface and plate, plate, kitchenware, ornaments, reflective equipment, etc.
<strong>6061</strong> is a common duralumin with good machinability and moderate strength. <br> <strong>6061</strong> is a heat-treatable alloy with good formability, weldability, machinability, and moderate strength.<br> <strong>It can still </strong>maintain good operation after annealing.<br> <strong>If there is a certain </strong> amount of manganese and chromium, the bad effect of iron can be neutralized.
The main alloying elements in 6161 alloy are magnesium and silicon, which provide moderate strength, good corrosion resistance, weldability, and oxidation resistance. It is widely used in various industrial structural parts requiring certain strength and high corrosion resistance. Its typical chemical composition is: Cu: 0.15–0.4%; Si: 0.4–0.8%; Fe: ≤0.7%; Mn: 0.15%; Mg: 0.8–1.2%; Zn: ≤0.25%; Cr: 0.04–0.35%; Ti: ≤0.15%. The difference between T6 and T651 tempers for 6161 aluminum plate is that T6 typically retains higher internal stress and may deform during machining, while T651—achieved by stretching after T6 treatment—effectively relieves internal stress, making it more suitable for precision machining.
GET A FREE QUOTE
CONTACT US
Room 1602, West Tower, Shounuo City Light, Huaiyin District, Jinan City, Shandong Province
GET A FREE QUOTE