PRODUCT CENTER
<strong>6063 aluminum</strong> alloy material. <br> <strong>The main alloy </strong> elements are magnesium and silicon, with excellent machining performance, excellent weldability, extrusion and electroplating, good corrosion resistance, toughness, easy to polish, color film, excellent anodic oxidation effect, is a typical extrusion alloy.
<strong>6082</strong> is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. <br> <strong>It also has moderate</strong> strength and can maintain good operability after annealing. <br> <strong>It is mainly </strong>used in mechanical structure, including bars, plates, pipes and profiles. <br> <strong>This alloy has similar </strong>but not identical mechanical properties to alloy 6061, and its -T6 state has higher mechanical properties.
<strong>2024 aluminum alloy,</strong> the main alloying elements are copper and magnesium.<br> <strong>Applications</strong> where high strength but low weight ratio is required, and good fatigue strength.<br> <strong>Not weldable,</strong> general processing performance. <br> <strong>Because</strong> of poor corrosion resistance, aluminum-zinc splints are often used as protection, which results in reduced fatigue strength.
<strong>The main alloying elements in 6061</strong> alloy are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect. <br> Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; 6061 aluminum plate its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
<strong>6082</strong> is a heat-treatable alloy with good formability, weldability, machinability and corrosion resistance. <br> <strong>It also has </strong> moderate strength and can maintain good operability after annealing. <br> <strong>It is mainly used</strong> in mechanical structure, including bars, plates, pipes and profiles.
<strong>Thickness: </strong>0.15-150mm<br> <strong>Port of Destination: </strong>Any port you like<br> <strong>Aluminium Sheets </strong>with high strength is mainly used make Fire Engine Side Panel and Dump Truck Floor in industry.<br> <strong>Because of its good</strong> energy absorption ability in collision experiment, engine mount, side impact beam, engine splash shield, ABS, airbag part, etc.
<strong>Aluminium Pipe</strong> can be produced in two types drawn and extruded aluminum pipe.<br> <strong>Extruded aluminum pipe</strong> is stocked in both seamless and structural (port-hole die).<br> <strong>Aluminium pipe</strong> is used in pressure or structural application.<br> <strong>These Aluminium Pipe</strong> are light weight, excellent corrosion resistance, and the ability to transmit heat rapidly are only a few of the benefits of aluminum pipes.
<strong>6061 alloy </strong>are magnesium and silicon, which have moderate strength, good corrosion resistance, weldability and good oxidation effect.<br> Widely used in various industrial structural parts requiring a certain strength and high antibiotic corrosion, its main chemical composition: Cu:0.15-0.4; Si: 0.4-0.8; Fe: 0.7 -; Mn: 0.15; Mg: 0.8-1.2; Zinc: 0.25; Cr: 0.04-0.35; Ti: 0.15 -; <strong>6061 aluminum plate</strong> its state T6 and T651 difference is that in general, T6 internal stress will be relatively large, processing will be deformed, the most suitable for processing state should be T651, he is on the basis of T6 tensile, eliminate internal stress.
GET A FREE QUOTE
CONTACT US
Room 1602, West Tower, Shounuo City Light, Huaiyin District, Jinan City, Shandong Province
GET A FREE QUOTE